Smart Wi-Fi Garage Door Opener

  • The external antenna can better receive Wi-Fi signals and can support up to 3 garage doors at the same time.
  • Compatible with over 200 brands and 1600 different models. Supported by the latest garage opener models as well as the old garage openers produced in the 1990s.
  • Comes with a high sensitivity sensor that monitors the status of the garage door more accurately.
  • Installation is much easier than you may think. You can make your garage door smart in just a few simple steps.
  • Check the compatible list at
  • 5V/1.0A DC or higher                                                            
  • 1 x Reset button
  • 1 x Status LED
Dimensions (W x D x H) 
  • 3.7 x 3.1 x 0.9 in. or 9.3 x 7.8 x 2.2 cm
Power Cord
  • 4.9 ft long or 1.5 meters long
Sensor Wire
  • 16.4 ft long or 5 meters long
Wireless Standards     
  • IEEE 802.11 b/g/n, 2.4GHz, 1T1R     
Wireless Security     
  • Support 64/128 bit WEP, WPA-PSK/WPA2-PSK
  • Does not support Enterprise Wi-Fi.             
  • EU: CE, RoHS, WEEE
Package Contents 
  • 1 x Smart garage door opener
  • 1 x USB power adapter
  • 1 x Door sensor with sensor wire
  • 1 x Cable tie
  • 1 x Test wire
  • 1 x Double-sided adhesive tapes
  • 1 x User manual
  • 4 x Screws
  • The additional sensor needs to be purchased separately for garage door 2 or door 3.    
System Requirements     
  • Smartphone running iOS 10* or later, Android 6.0 or later
  • Existing Wi-Fi network
  • *HomeKit version requires iOS 13 or later.
  • Operating Temperature: 0°C~40°C (32°F~104°F)
  • Storage Temperature: -40°C~70°C (-40°F~158°F)
  • Operating Humidity: 10%~90%­ non-condensing
  • Storage Humidity: 5%~90%­ non-condensing
How can I set timer for my smart garage door opener?

Please go Home page of your Meross App, tap the “edit” button on the right side of your device’s icon. There are  “Auto close” and “Fixed time close” functions in the app.

Is Meross Smart Garage Door Opener compatible with my garage door opener? Do I need accessories?

General Instructions.

Meross smart garage door opener is a companion device for existing garage door openers and can be used in conjunction with most garage door openers on the market.

Method 1:

Go to the following page and select your brand/model.


Method 2:

If you are not sure about the compatibility, use pilers to short the wall button terminals. If garage door opens or closes, it works. Otherwise please contact us to get an accessory to make it work. 

If you pass the inspection in Method 1 or 2 , the smart garage door opener can be used directly with your garage door.

If you cannot pass the method 2 check, or the check result is shown below in method 1.



Please email the following to, and we will send you the correct accessory so that  can be used with your garage door opener.

1. The Amazon order ID.

2. The learn button color of your garage door opener (below is a yellow learn button for reference).

3. Your brand and model of the garage motor.

4. The address of the accessory shipment.


Learn More